Up and Running with AutoCAD 2017 - Edition 1 - By Elliot J. Gindis Elsevier Inspection Copies

Purchase textbook

Up and Running with AutoCAD 2017,

Edition 1 2D and 3D Drawing and Modeling

By Elliot J. Gindis

Publication Date: 24 Aug 2016

Student resources

0 reviews

Description

Up and Running with AutoCAD 2017: 2D and 3D Drawing and Modeling presents Gindis’ combination of step-by-step instruction, examples, and insightful explanations. The emphasis from the beginning is on core concepts and practical application of AutoCAD in engineering, architecture, and design. Equally useful in instructor-led classroom training, self-study, or as a professional reference, the book is written with the user in mind by a long-time AutoCAD professional and instructor based on what works in the industry and the classroom.

Key Features

Strips away complexities and reduces AutoCAD to easy-to-understand basic concepts
Teaches only what is essential in operating AutoCAD, thereby immediately building student confidence
Fully covers the essentials of both 2D and 3D in one affordable easy to read volume
Presents basic commands in a documented, step-by-step guide on what to type in and how AutoCAD responds
Includes several complementary video lectures by the author that accompany both 2D and 3D sections

About the author

By Elliot J. Gindis, Former President, Vertical Technologies Consulting and Design, Lancaster, CA, USA

Table of Contents

About the Author
- Previous Textbooks By Elliot Gindis
Preface
- What Is AutoCAD?
- About This Book
- Teaching Methods
- Text Organization
- What Your Goal Should Be
Acknowledgments
Level 1: Chapters 1–10
- Level 1. Chapters 1–10
- Chapter 1. AutoCAD Fundamentals—Part I
  - Abstract
  - 1.1 Introduction and Basic Commands
  - 1.2 The AutoCAD Environment
  - 1.3 Interacting With AutoCAD
  - 1.4 Practicing the Create Objects Commands
  - 1.5 View Objects
  - 1.6 Practicing the Edit/Modify Objects Commands
  - 1.7 Selection Methods
  - 1.8 Drawing Accuracy—Part 1
  - 1.9 Drawing Accuracy—Part 2
  - 1.10 OSNAP Drafting Settings
  - 1.11 Summary
- Chapter 2. AutoCAD Fundamentals—Part II
  - Abstract
  - 2.1 Grips
  - 2.2 Units and Scale
  - 2.3 Snap and Grid
  - 2.4 Cartesian Coordinate System
  - 2.5 Geometric Data Entry
  - 2.6 Inquiry Commands
  - 2.7 Additional Drafting Commands
  - 2.8 Summary
- Spotlight On: Architecture
  - Spotlight On: Architecture
  - Chapter 3. Layers, Colors, Linetypes, and Properties
    - Abstract
    - 3.1 Introduction to Layers
    - 3.2 Introduction to Linetypes
    - 3.3 Introduction to Properties
    - 3.4 In-Class Drawing Project: Floor Plan Layout
    - 3.5 Summary
  - Chapter 4. Text, Mtext, Editing, and Style
    - Abstract
    - 4.1 Introduction to Text and Mtext
    - 4.2 Text
    - 4.3 Mtext
    - 4.4 Style
    - 4.5 Spell Check
    - 4.6 In-Class Drawing Project: Adding Text and Furniture to Floor Plan Layout
    - 4.7 Summary
  - Chapter 5. Hatch Patterns
    - Abstract
    - 5.1 Introduction to Hatch
    - 5.2 Hatch Procedures
    - 5.3 Working With Hatch Patterns
    - 5.4 Gradient and Solid Fill
    - 5.5 Hatching Using the Ribbon
    - 5.6 In-Class Drawing Project: Adding Hatch to Floor Plan Layout
    - 5.7 Summary
- Spotlight On: Mechanical Engineering
  - Spotlight On: Mechanical Engineering
  - Chapter 6. Dimensions
    - Abstract
    - 6.1 Introduction to Dimensions
    - 6.2 Types of Dimensions
    - 6.3 Editing Dimensions
    - 6.4 Customizing Dimensions
    - 6.5 Center Marks and Centerlines
    - 6.6 In-Class Drawing Project: Adding Dimensions to Floor Plan Layout
    - 6.7 Summary
  - Chapter 7. Blocks, Wblocks, Dynamic Blocks, Groups, and Purge
    - Abstract
    - 7.1 Introduction to Blocks
    - 7.2 Insert
    - 7.3 Purge
    - 7.4 Wblocks
    - 7.5 Dynamic Blocks
    - 7.6 Groups
    - 7.7 Summary
  - Chapter 8. Polar, Rectangular, and Path Arrays
    - Abstract
    - 8.1 Polar Array
    - 8.2 Rectangular Array
    - 8.3 Path Array
    - 8.4 In-Class Drawing Project: Mechanical Device
    - 8.5 Summary
- Spotlight On: Electrical Engineering
  - Spotlight On: Electrical Engineering
  - Chapter 9. Basic Printing and Output
    - Abstract
    - 9.1 Introduction to Printing and Plotting
    - 9.2 The Essentials
    - 9.3 The Plot Dialog Box
    - 9.4 Page Setup Manager
    - 9.5 Summary
  - Chapter 10. Advanced Output—Paper Space
    - Abstract
    - 10.1 Introduction to Paper Space
    - 10.2 Paper Space Concepts
    - 10.3 Summary
- Level 1: Answers to Review Questions
  - Level 1. Answers to Review Questions
    - Chapter 1 Review Questions
    - Chapter 2 Review Questions
    - Chapter 3 Review Questions
    - Chapter 4 Review Questions
    - Chapter 5 Review Questions
    - Chapter 6 Review Questions
    - Chapter 7 Review Questions
    - Chapter 8 Review Questions
    - Chapter 9 Review Questions
    - Chapter 10 Review Questions
Level 2: Chapters 11–20
- Level 2. Chapters 11–20
- Chapter 11. Advanced Linework
  - Abstract
  - 11.1 Introduction to Advanced Linework
  - 11.2 Pline (Polyline)
  - 11.3 Xline (Construction Line)
  - 11.4 Ray
  - 11.5 Spline
  - 11.6 Mline (Multiline)
  - 11.7 Sketch
  - 11.8 Level 2 Drawing Project (1 of 10): Architectural Floor Plan
  - 11.9 Summary
- Chapter 12. Advanced Layers
  - Abstract
  - 12.1 Introduction to Advanced Layers
  - 12.2 Script Files
  - 12.3 Layer State Manager
  - 12.4 Layer Filtering
  - 12.5 Level 2 Drawing Project (2 of 10): Architectural Floor Plan
  - 12.6 Summary
- Spotlight On: Interior Design
  - Spotlight On: Interior Design
  - Chapter 13. Advanced Dimensions
    - Abstract
    - 13.1 Introduction to Advanced Dimensions
    - 13.2 Dimension Style Manager
    - 13.3 Introduction to Constraints
    - 13.4 Geometric Constraints
    - 13.5 Dimensional Constraints
    - 13.6 Dimension-Driven Design
    - 13.7 Level 2 Drawing Project (3 of 10): Architectural Floor Plan
    - 13.8 Summary
  - Chapter 14. Options, Shortcuts, CUI, Design Center, and Express Tools
    - Abstract
    - 14.1 Options
    - 14.2 Shortcuts
    - 14.3 Customize User Interface
    - 14.4 Design Center
    - 14.5 Express Tools
    - 14.6 Level 2 Drawing Project (4 of 10): Architectural Floor Plan
    - 14.7 Summary
  - Chapter 15. Advanced Design and File Management Tools
    - Abstract
    - 15.1 Introduction to Advanced Design and File Management Tools
    - 15.2 Align
    - 15.3 Action Recording
    - 15.4 Audit and Recover
    - 15.5 Blend
    - 15.6 Break and Join
    - 15.7 CAD Standards
    - 15.8 Calculator
    - 15.9 Defpoints
    - 15.10 Divide and Point Style
    - 15.11 Donut
    - 15.12 Draw Order
    - 15.13 eTransmit
    - 15.14 Filter
    - 15.15 Hyperlink
    - 15.16 Lengthen
    - 15.17 Object Snap Tracking (OTRACK)
    - 15.18 Overkill
    - 15.19 Point and Node
    - 15.20 Publish
    - 15.21 Raster
    - 15.22 Revcloud
    - 15.23 Sheet Sets
    - 15.24 Selection Methods
    - 15.25 Stretch
    - 15.26 System Variables
    - 15.27 Tables
    - 15.28 Tool Palette
    - 15.29 UCS and Crosshair Rotation
    - 15.30 Window Tiling
    - 15.31 Wipeout
    - 15.32 Level 2 Drawing Project (5 of 10): Architectural Floor Plan
    - 15.33 Summary
- Spotlight On: Civil Engineering
  - Spotlight On: Civil Engineering
  - Chapter 16. Importing and Exporting Data
    - Abstract
    - 16.1 Introduction to Importing and Exporting Data
    - 16.2 Importing and Exporting to and from MS Office Applications
    - 16.3 Screen Shots
    - 16.4 JPGs
    - 16.5 PDFs
    - 16.6 Other CAD Software
    - 16.7 Exporting and the Save As Feature
    - 16.8 Inserting and OLE
    - 16.9 Level 2 Drawing Project (6 of 10): Architectural Floor Plan
    - 16.10 Summary
  - Chapter 17. External References (Xrefs)
    - Abstract
    - 17.1 Introduction to Xrefs
    - 17.2 Using Xrefs
    - 17.3 Layers in Xrefs
    - 17.4 Editing and Reloading Xrefs
    - 17.5 Multiple Xrefs
    - 17.6 Ribbon and Xrefs
    - 17.7 Level 2 Drawing Project (7 of 10): Architectural Floor Plan
    - 17.8 Summary
  - Chapter 18. Attributes
    - Abstract
    - 18.1 Introduction to Attributes
    - 18.2 Creating the Design
    - 18.3 Creating the Attribute Definitions
    - 18.4 Creating the Attribute Block
    - 18.5 Attribute Properties and Editing
    - 18.6 Attribute Extraction
    - 18.7 Invisible Attributes
    - 18.8 Level 2 Drawing Project (8 of 10): Architectural Floor Plan
    - 18.9 Summary
- Spotlight On: Aerospace Engineering
  - Spotlight On: Aerospace Engineering
  - Chapter 19. Advanced Output and Pen Settings
    - Abstract
    - 19.1 Introduction to Advanced Output and Pen Settings
    - 19.2 Setting Standards
    - 19.3 The CTB File
    - 19.4 Additional CTB File Features
    - 19.5 Lineweight Settings
    - 19.6 Level 2 Drawing Project (9 of 10): Architectural Floor Plan
    - 19.7 Summary
  - Chapter 20. Isometric Drawing
    - Abstract
    - 20.1 Introduction to Isometric Perspective
    - 20.2 Basic Technique
    - 20.3 Ellipses in Isometric Drawing
    - 20.4 Text and Dimensions in Isometric Drawing
    - 20.5 Level 2 Drawing Project (10 of 10): Architectural Floor Plan
    - 20.6 Summary
- Level 2: Answers to Review Questions
  - Level 2 Answers to Review Questions
    - Chapter 11 Review Questions
    - Chapter 12 Review Questions
    - Chapter 13 Review Questions
    - Chapter 14 Review Questions
    - Chapter 15 Review Questions
    - Chapter 16 Review Questions
    - Chapter 17 Review Questions
    - Chapter 18 Review Questions
    - Chapter 19 Review Questions
    - Chapter 20 Review Questions
Level 3: Chapters 21–30
- Level 3. Chapters 21–30
- Chapter 21. 3D Basics
  - Abstract
  - 21.1 Axes, Planes, and Faces
  - 21.2 3D Workspaces, Ribbon, Toolbars, and 3D Options
  - 21.3 Entering and Exiting 3D
  - 21.4 Projecting Into 3D
  - 21.5 3D Dynamic Views
  - 21.6 Extrude
  - 21.7 Visual Styles: Hide and Shade
  - 21.8 ViewCube and Navigation Bar
  - 21.9 Summary
- Chapter 22. Object Manipulation
  - Abstract
  - 22.1 Introduction to Object Manipulation
  - 22.2 Summary
- Spotlight On: Chemical Engineering
  - Spotlight On: Chemical Engineering
  - Chapter 23. Boolean Operations and Primitives
    - Abstract
    - 23.1 Introduction to Boolean Operations
    - 23.2 Introduction to Primitives
    - 23.3 Applying Primitives
    - 23.4 Summary
  - Chapter 24. Solid Modeling
    - Abstract
    - 24.1 Introduction to Solid Modeling
    - 24.2 Summary
  - Chapter 25. Advanced Solids, Faces, and Edges
    - Abstract
    - 25.1 Introduction to Advanced Solids, Faces, and Edges
    - 25.2 Working With Faces
    - 25.3 Working With Edges
    - 25.4 Summary
- Spotlight On: Biomedical Engineering
  - Spotlight On: Biomedical Engineering
  - Chapter 26. Surfaces and Meshes
    - Abstract
    - 26.1 Introduction to Surfaces and Meshes
    - 26.2 Surfacing Commands
    - 26.3 Smooth Mesh Primitives
    - 26.4 Summary
  - Chapter 27. Slicing, Sectioning, Layouts, and Vports
    - Abstract
    - 27.1 Introduction to Slicing, Sectioning, Layouts, and Vports
    - 27.2 Slicing and Sectioning
    - 27.3 Layouts and Details
    - 27.4 Flatten and Flatshot
    - 27.5 Vports
    - 27.6 Summary
  - Chapter 28. Advanced UCS, Views, Text, and Dimensions in 3D
    - Abstract
    - 28.1 Introduction to Advanced UCS, Views, Text, and Dimensions in 3D
    - 28.2 Advanced UCS
    - 28.3 Views and View Manager
    - 28.4 Text and Dimensions in 3D
    - 28.5 Summary
- Spotlight On: Drafting, CAD Management, Teaching, and Consulting
  - Spotlight On: Drafting, CAD Management, Teaching, and Consulting
    - Overview
    - AutoCAD Training Requirements
    - Architectural Drafting
    - Engineering Drafting
    - CAD Management
    - Teaching AutoCAD
    - AutoCAD Consulting
  - Chapter 29. Dview, Camera, Walk and Fly, Path Animation
    - Abstract
    - 29.1 Dynamic View
    - 29.2 Cameras
    - 29.3 Walk and Fly
    - 29.4 Path Animation
    - 29.5 Summary
  - Chapter 30. Lighting and Rendering
    - Abstract
    - 30.1 Introduction to Lighting and Rendering
    - 30.2 Lighting
    - 30.3 Materials and Rendering
    - 30.4 Summary
- Level 3: Answers to Review Questions
  - Level 3. Answers to Review Questions
    - Chapter 21 Review Questions
    - Chapter 22 Review Questions
    - Chapter 23 Review Questions
    - Chapter 24 Review Questions
    - Chapter 25 Review Questions
    - Chapter 26 Review Questions
    - Chapter 27 Review Questions
    - Chapter 28 Review Questions
    - Chapter 29 Review Questions
    - Chapter 30 Review Questions
Appendix A. Additional Information on AutoCAD
- A.1 Who makes AutoCAD?
- A.2 What Is AutoCAD LT?
- A.3 How Is AutoCAD Purchased and How Much Does It Cost?
- A.4 Are There Significant Differences Between AutoCAD Releases?
- A.5 Is There an AutoCAD for the Mac?
- A.6 A Brief History of Autodesk and AutoCAD
- A.7 AutoCAD Releases
- A.8 Major Autodesk Products
- A.9 AutoCAD-Related Websites
Appendix B. Other CAD Software, Design and Analysis Tools, and Concepts
- B.1 MicroStation
- B.2 ArchiCAD
- B.3 TurboCAD
- B.4 Other Design Software
Appendix C. File Extensions
- C.1 AutoCAD Primary Extensions
- C.2 AutoCAD Secondary Extensions
- C.3 Miscellaneous Software Extensions
Appendix D. Custom Linetypes and Hatch Patterns
- D.1 Linetype Definitions (Basic)
- D.2 Linetypes (String Complex and Shape Complex)
- D.3 Hatch Pattern Definitions (Basic)
Appendix E. Principles of CAD Management
- E.1 Part 1. Know the Seven Golden Rules of AutoCAD
- E.2 Part 2. Know the Capabilities and Limitations of AutoCAD
- E.3 Part 3. Maintain an Office CAD Standard
- E.4 Part 4. Be an Effective Teacher and Hiring Manager
- E.5 Part 5. Stay Current and Competent
Appendix F. AutoLISP Basics and Advanced Customization Tools
- F.1 Overview 1. AutoLISP
- F.2 Overview 2. Visual LISP
- F.3 Overview 3. VBA, .NET, Active X, and ObjectARX
- F.4 AutoLISP Fundamentals
- F.5 Variables and Comments
- F.6 Advanced Features and the Vlide Command
Appendix G. PC Hardware, Printers/Plotters, Networks, and the Cloud
- G.1 PC Hardware
- G.2 Printers and Plotters
- G.3 Networks
- G.4 The Cloud
Appendix H. What Are Kernels?
Appendix I. Lighting, Rendering, Effects, and Animation
Appendix J. 3D Printing
- J.1 Overview and History
- J.2 Printing Process—Part 1 (Creating the Model)
- J.3 Printing Process—Part 2 (Exporting and Preparing the Model)
- J.4 Printing Process—Part 3 (Printing the Model)
- J.5 Printing Process—Part 4 (Finishing Model)
- J.6 Applications, Related Issues, and the Future of 3D Printing
Appendix K. AutoCAD Certification Exams
Appendix L. AutoCAD Employment
Appendix M. AutoCAD Humor, Oddities, Quirks, and Easter Eggs
- M.1 Oddities and Quirks
- M.2 Easter Eggs
Appendix N. The Future of AutoCAD
- N.1 2D Design, AutoCAD, and Verticals
- N.2 3D Design and Solid Modeling
- N.3 Merging of Industries
- N.4 Revit and BIM
- N.5 The Future of AutoCAD
Index

Book details

ISBN: 9780128110584

Page Count: 776

Retail Price : £70.99

Younis, Up and Running with Autodesk Inventor Simulation 2011, 9780123821027, Butterworth-Heinemann, Apr 2010, 464 pp, $97.95
Simmons, Manual of Engineering Drawing, Fourth Edition, 9780080966526, Butterworth-Heinemann, Jun 2012, 374 pp, $57.95
Jack, Engineering Design, Planning, and Management, 9780123971586, Academic Press, Jan 2013, 592 pp, $79.95

Student Resources

Companion Site

Audience

Beginner through advanced users of AutoCAD. Architectural engineers, drafting, civil/construction engineers, mechanical engineers. Students taking drafting/engineering drawing courses in engineering and engineering technology programs

Related Titles